If you like Philips aside from that feature (being self-centering is nice sometimes), JIS the Japanese industrial standard is basically the same design but its not intended to cam out, stripping the fastner
To my understanding you can safely use a JIS bit with a Philips fastner to reduce likelihood you strip it. But you ideally shouldn’t use a Philips bit to turn a JIS screw. You can identify a JIS fastner by a little dimple in the corner by the plus shaped indentation
Edit someone linked this post from tool manufacturer tekton saying much of what I described may be popular misunderstanding, it may be worth taking this info with serval grains of salt https://www.tekton.com/blog/jis-vs-phillips-screwdriver-tip-geometry-and-fastener-compatibility?slug=jis-vs-phillips-screwdriver-tip-geometry-and-fastener-compatibility
If you like Philips aside from that feature (being self-centering is nice sometimes), JIS the Japanese industrial standard is basically the same design but its not intended to cam out, stripping the fastner
To my understanding you can safely use a JIS bit with a Philips fastner to reduce likelihood you strip it. But you ideally shouldn’t use a Philips bit to turn a JIS screw. You can identify a JIS fastner by a little dimple in the corner by the plus shaped indentation
Posidrive bits being mixed in with Phillips also helps strip out a lot of Phillips fasteners